Skip to main content

Initiate Usage

If an instrument does not have a computer to log into, you may need to initiate tracking manually.  There are two ways to do this - via computer or the bookitlab app. The instructions are essentially the same, but below are screenshots to guide you through each.

The app is the preferred method.

 

Via the app:

Download BookitLab from the AppStore. When launched, if asked to enter your institute initials, type IGB. Log in via SSO.

image-1717519835685.png

On the main dashboard, you should see the Usages Widget. Click "Start Usage".

image-1717520089157.png

 

Choose the equipment that you have reserved,already inreserved. In this example, we are choosing the cryostat. Click continue.

image-1717520163053.png

On the Usage Screen, your user group and user name should be accurate.  Under projects, choose the CFOP that the usage will bill to.  Click "Start Usage".

image-1717520291649.png

 

You will receive a confirmation screen to let you know this was successful, and also indicating how to stop your usage.

image-1717520382356.png

 

To end your usage, go back to the main dashboard and scroll down toward your active usage widget.  Click "Log off".

image-1717520490769.png

 

 

Via computer: You can start this by going to the Usages Widget on the Main Dashboard.  Choose Start Usage.

image-1716756928122.png

Choose the relevant instrument by scrolling or searching for the name. Select the instrument.

image-1716756935016.png

Choose the User Group (PI), User, and Project Name (CFOP). Click on Start Usage.

image-1716756941774.png

A confirmation screen will let you know this was successful.

image-1716756946955.png

To end usage, go back to the Main Dashboard and scroll down to the "Currently Active Usages" item. Choose Log Off.

image-1716756951817.png

Back to top